Mirrow Moovo LN4 Series User Manual

Essential safety instructions for personal protection during installation and operation.

Key warnings and precautions for safe and compliant gate automation installation.

Details the automated sliding gate system and its intended applications.

Lists and illustrates all components needed to set up the automation system.

Ensures the gate and its environment are suitable for automation.

Verifies gate dimensions and weight against product specifications.

Illustrates a standard installation layout of Moovo automation components.

Guidance on locating installation positions for system components.

Instructions for positioning the gearmotor, including left/right side setup.

Explains 'Bus' system connection configurations for devices.

Ensures all necessary tools and materials are available and in good condition.

Instructions for digging pits and laying electrical cable ducting.

Guidelines for preparing and laying electrical cables for system connections.

Detailed steps for physically installing the gearmotor and related parts.

Diagram and explanation of how to connect devices using the 'Bus' system.

How to set the gearmotor position (left/right) via the control unit jumper.

Step-by-step guide for mounting and wiring the flashing light (MF).

Guide for mounting and wiring the MP photocells, including base and cover attachment.

Configuring photocell functions using jumpers for different operating modes.

Steps for mounting and wiring the MK keypad for automation control.

Instructions for installing the MB buffer battery for emergency power.

Guidance on connecting the automation to the electrical mains.

Procedures for powering up the unit and verifying initial electrical connections.

Setting up Bus devices and defining gate opening/closing limit positions.

Procedure for memorizing MT4 transmitter keys for automation control.

Setting up the MK keypad in 'Traditional' or 'Safety' operating modes.

Customizing functions like auto-closure, speed, and obstacle sensitivity.

Procedure to memorize a new transmitter near the control unit.

How to delete specific or all data from the control unit memory.

Essential steps for testing and commissioning the automation system.

Final step to install and connect the buffer battery after testing.

Explains LED flash patterns and corresponding problems and solutions.

Procedure for connecting the automation to the electrical mains with an alternative cable.

Steps to test gate movement, safety devices, and force adjustments.

Tasks required for final system commissioning and documentation.

Recommendations for regular checks to ensure system functionality.

Guidelines for environmentally responsible disposal of the product.

Detailed technical data for the LN432e gearmotor.

Technical details for the MF flashing light indicator.

Technical data for the MT4 radio transmitter.

Technical data for the MP photocell presence detector.

Technical data for the MK wall-mounted control keypad.