In case of stoves 11108O/11108V/11208O/11208V/11308O/11308V, the lateral connection is
located at 85 mm from the stove rear edge to the aperture edge.
1.2 SAUNA ROOM
1.2.1 WALL AND CEILING STRUCTURES
All massive wall surfaces (e.g., brick, concrete, glass brick) accumulate a lot of heat. If you would
like to use a sauna stove of reasonably low heat output, the walls and ceiling must be properly
insulated.
1.2.2FLOOR
The floor under the stove must be of non-combustible material or be protected by a bottom plinth.
The floor structure needs to withstand the stove weight (incl. stones).
To Next Page
Loading...