miseno MNOSA216CP User Manual

1
You may need/Usted puede necesitar/
Aticles dont vous pouvez avoir besion
English Español
Français
CAUTION-TIPS FOR REMOVAL
OF OLD FAUCET:
PRECAUCIÓN-CONSEJOS PARA
CAMBIAR LA LLAVE
MEZCLADORA:
ATTENTION-SUGGESTIONS
POUR ENLEVER L'ANCIEN
ROBIENT:
Always turn off water supply
before removing existing faucet
or replacing any part of the
faucet. Open the faucet handle
to relieve water pressure and
ensure that water is completely
shut off.
Siempre corte el suministro de
agua antes de retirar el grifo actual
o remplazar cualquier pieza del
mismo. Abra la llave del grifo para
liberar la presión de agua y
asegurar que ya no corre agua.
Toujours couper l'alimentation en
eau avant d'enlever ou de
démonter le robinet. Ouvrir le
robinet pour libérer la pression
d'eau et pour s'assurer que
l'alimentation en eau a bien été
coupée.
CARE INSTRUCTIONS: INSTRUCCIONES DE CUIDADO: DIRECTIVES D'ENTRETINE:
To preserve the finish of your
faucet, apply non-abrasive wax.
Any cleaners should be rinsed
off immediately. Do not use
abrasive cleaners on the faucet.
Para conservar el acabado que cubre
las partes metálicas de su llave
mezcladora, aplique cera que no sea
abrasive, como una cera para autos.
Si usa algún tipo de limpiador,
deberá enjuagarlo inmediatamente.
Los abrasivos suaves son aceptables
en acabados platinum y LifeShine.
Pour préserver le fini des pièces
métalliques du robinet, appliquer
une cire non abrasive comme une
cire à votiure. Rincer
immédiatement le robinet aprés
l'avoir nettoyé avec un agent
nettoyant. Les finis platinum et
LifeShine peuvent être nettoyés à
l'aide de produits abrasifs doux.
16/08/16 REV.A
Sealant Tape
Cinta Selladora
Ruban d'étanchéité
SHOWER ARM
Model MNOSA216CP, MNOSA216BN, MNOSA216ORB
BRAZO DE DUCHA
Modelos MNOSA216CP, MNOSA216BN, MNOSA216ORB
BRAS DE DOUCHE
Modèles MNOSA216CP, MNOSA216BN, MNOSA216ORB

miseno MNOSA216CP Specifications

General

Brand	miseno
Model	MNOSA216CP
Category	Bathroom Fixtures
Language	English

Summary

General Installation Safety and Care

Old Faucet Removal Precautions

Always turn off water supply before removing existing faucet or replacing any part of the faucet. Open the faucet handle to relieve water pressure and ensure that water is completely shut off.

Faucet Finish Care Instructions

To preserve the finish of your faucet, apply non-abrasive wax. Any cleaners should be rinsed off immediately. Do not use abrasive cleaners on the faucet.

Shower Arm Installation Guide

Shower Arm Installation Steps

Detailed instructions on how to install the shower arm, including flange and thread sealant tape usage.

Single Setting Showerhead Installation

Showerhead Replacement Steps

Instructions for removing the old shower head and installing the new one by threading the ball onto the shower arm.

Valve Trim Kit Installation

Valve Trim Kit Installation Steps

Step-by-step guide for installing the valve trim kit components onto the valve body, including screw nut and stem extension.

Valve Trim Kit Components Overview

Diagram and identification of parts included in the valve trim kit, such as escutcheon, connector, nut, and handle.