Need help?Do you have a question about the Missile Works RRC3 and is the answer not in the manual?
Essential safety guidelines for operating and handling the RRC3 unit to prevent damage or malfunction.
Outlines default configuration values for arming altitude, deployment, and audio settings.
Instructions on securely mounting the RRC3 unit within the rocket's bay, including clearances.
Details battery requirements, output current ratings, power consumption, and brownout prevention.
Guidance on selecting and connecting a suitable power switch for the RRC3 unit.
Instructions for correctly connecting ejection charges to the drogue and main terminals.
Explanation of different operational states identified by piezo and LED behavior during flight.
Lists specific fault codes and their meanings for troubleshooting potential hardware or configuration issues.
Explains how to configure settings and access flight logs using the onboard DIP switches.
Step-by-step guide to re-programming base settings using DIP switches and the program button.
How to retrieve flight data and diagnostic information using the DIP switch interface.
Procedures for performing diagnostic tests on sensors and outputs using DIP switches.
Explains flexible control options for defining custom sequences for the auxiliary output.
Defines the logic for activating the Aux Output based on trigger events, timers, and comparators.
Explains filtering stages applied to pressure data to determine velocity and ensure mach immunity.
General| Data Logging | Yes |
|---|---|
| Altitude Sensor | Barometric |
| Operating Temperature | -20 to +60°C |
| Channels | 3 |
| Telemetry | Yes |
| Altimeter | Yes |
| Deployment Channels | 2 |
| Battery Voltage | 3.7V |
| Power Supply | 3.7V LiPo |
| Battery Type | LiPo |
To Next Page
