Mission 529 USB Power Converter Quick Start Guide V1.0
STOP! Please read this before connecting your Mission 529
What is the 529?
The Mission 529 is the world’s fi rst USB to effects pedal
power converter. Connected to a power supply such as a
wall charger, rechargeable battery pack, or computer USB
port, the 529 provides 5 isolated 9V effects pedal power
outputs.
Two 529’s can be chained together via USB link, to power
up to 10 pedals.
What’s in the box?
1 x Mission 529 Power Converter
1 x 5V 12W Wall power supply
1 x 10’ USB cable
1 x 3’ USB cable
5 x 2’ 2.1mm power cables
1 x 10,000mAh battery pack (optional)
Power
Each 529 can support a maximum of 1200mA (4 x 150mA
and 1 x 500mA). This is dependent on the USB power
source. The 529 is provided with a 2.4A USB plug-in power
supply which can power up to two 529’s. When using a
plug-in power supply or battery other than those supplied
with the 529, check the specifi cations to determine the
power output.
Connections
Connect the USB IN on the 529 to the included USB wall
charger using a USB A-B cable. When USB power is present
the LED’s next to the outputs will illuminate blue.
Connect your 9V pedals to the appropriate power outputs
using the supplied power cables. Note that all outputs are
center pin negative. Use an appropriate polarity reversal
adapter, if using center pin positive pedals.
Scan QR Code for more information
https://missionengineering.com/support/529-electronic-user-guide
To Next Page
Need help?
General
