Mission SP1-L6H User Manual

Line 6 Expression Pedals
SP1-L6H
 1-L6
U r
Guide
Mission Engin ring Inc.
www.missionengineering.com
info@missionengineering.com
©Mission Engineering Inc. 2016. All rights reserved. EP1-L6 and
SP1-L6H is a Trademark of Mission Engineering Inc. Trademarks,
registered trademarks, product names, logos and other materials are
the property of their respective owners.
MISSION
ENGINE ING
Sa ty
In ru ions

Read, Keep & Follow these instructions

Heed all warnings

Clean only with dry cloth

Do not use this apparatus near water

Do not expose the apparatus to dripping or
splashing and ensure that no objects filled with
liquids, shall be placed on the apparatus

WARNING: To reduce the risk of fire or electric
shock do not expose this apparatus to rain or
moisture

Unplug this apparatus during lightning storms or
when unused for long periods of time

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions

Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat

Only use attachments/accessories specified by
the manufacturer

Prolonged listening at high volume levels may
cause irreparable hearing loss and/or damage.
Always be sure to practice “safe listening.”

Refer all servicing to qualified service personnel.
Service is required when the apparatus has been
damaged in any way, such as:
- power-supply cord or plug is damaged
- liquid has been spilled or objects have fallen
into the apparatus
- the unit has been exposed to rain or moisture.
- the unit is dropped or the enclosure is
damaged
- the unit does not operate normally or changes
in performance in a significant way

Mission SP1-L6H Specifications

General

Brand	Mission
Model	SP1-L6H
Category	Music Pedal
Language	English

Summary

Safety Instructions

General Safety Precautions

Read, keep, and follow all instructions. Heed warnings. Clean with a dry cloth. Avoid water exposure and liquids.

Introduction

Product Features

EP1-L6 Features

Single output expression pedal for Line 6 digital amps, multi-effects, and effects pedals.

SP1-L6H Features

Features a toe switch for Line 6 Helix Rack, supporting functions like effect on/off.

Power Requirements

Connections

EP1-L6 Connection

Connect OUT1 to the pedal input on compatible Line 6 devices. OUT2 is unused.

SP1-L6H Connection

Connect OUT1 to EXP input and OUT2 to EXP TOE SWITCH input on Helix Rack/Floor Controller.

Configuration

Adjustments

Pedal Tension Adjustment

Adjust rocker tension using the screw on the rear of the pedal with the provided hex key.

Switch Sensitivity Adjustment

Adjust switch sensitivity by raising or lowering the switch in the chassis using spacers.

Specifications

Electrical Specifications

Details on potentiometer (10k Ohm, Linear) and switch (Momentary, NO) characteristics.