Mist AP33 - Technical Specifications

10
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
Technical Specifications:
Feature Description
Power options 802.3at/802.3af PoE
Dimensions 202mm x 202mm x 44mm (7.95in x 7.95in x 1.73in)
Weight
AP33: 0.88 kg (1.94 lbs)
AP32: 0.79 kg (1.74 lbs)
AP32E: 0.81 kg (1.78 lbs)
Operating
temperature
AP33: -5° to 40° C
AP32: -5° to 40° C
AP32E: -5° to 40° C
Operating humidity 10% to 90% maximum relative humidity, non-condensing
Operating altitude 3,048m (10,000 ft)
I/O
1 – 100/1000/2500BASE-T auto-sensing RJ-45 with PoE
1 – 10/100/1000BASE-T auto-sensing RJ-45
1 – USB2.0
RF
5GHz - 4x4:4SS 802.11ax MU-MIMO & SU-MIMO
2.4GHz – 2x2:2SS 802.11ax MU-MIMO & SU-MIMO
2.4GHz / 5GHz scanning radio
AP33 - 2.4GHz BLE with Dynamic Antenna Array
AP32/AP32E - 2.4GHz BLE with Omni Antenna
Maximum PHY rate
Total maximum PHY rate – 2974 Mbps
5GHz – 2400 Mbps
2.4GHz – 574Mbps
Indicators Multi-color status LED
Compliance standards
CAN/CSA-C22.2 No. 62368-1-14
UL 2043
FCC Part 15.247, 15.407, 15.107, and 15.109
RSS-247
ICES-003 (Canada)
Suitable for use in environmental air space in accordance with Section 300-22(C) of the
National Electrical Code, and Sections 2-128, 12-010(3), and 12-100 of the Canadian
Electrical Code, Part 1, CSA C22.1.
Warning: The AP must be mounted only horizontally if you mount it into a plenum space.