Mistral MVC306 - Care and Maintenance; Cleaning Main Unit and Brush Heads; Dust Cup and Filter Cleaning; Brush Roller Maintenance

10
Care and Maintenance
Main Unit, Floor Brush or Turbo Brush
Head
Use a damp cloth to wipe of any dirt deposits
from the external brush head enclosure if need
arises.
Do not use abrasive cleaning agents (scouring
agents, diluting agents) because they can
damage the synthetic surface of the device.
Warning: Don’t let water enter into the
motorized brush head as there are
electrical terminations contained within
and may irreparably damage.
Clean dust cup and lter
In order to achieve the best performance, empty
the dust cup
and clean lter screen after each use.
1. Turn off the vacuum cleaner.
2. Hold dust cup release button and take the
dust cup out from vacuum cleaner.
3. Push lever to release bottom lid and debris
will empty.
4. Take out the stainless steel lter screen and
clean it with water.
5. Take white fabric lter and black foam lter
out and clean them with water monthly.
6. Reassemble once completely dry.
Clean brush roller
1. Place motorized brush head upside down.
2. Push the Lock button to unlock position to
take out the brush roller.
3. Use ngers and stiff brush to remove hair or
debris.
4. Clean brush roller separately with water if
needed.
Warning: Depending on use, over time the roller
may have excessive hair or debris attached that
need to be removed more regularly in order
for the appliance to work efciently, so check
regularly and clean.
Specication
Rating Voltage: 22.2V
Working time 20-45mins
Noise <=75db
Suction 10Kpa
Battery Adapter: input 100-240V 50/60Hz 0.5A
Battery Adapter: output DC 26.5V 0.5A
Battery type: Lithium battery
Battery capacity 22.2V 2200mAh
Charging time: Approx. 5 Hours
Note: As a result of continual
improvements, the design and
specications of the product within may
differ slightly to the unit illustrated from
the packaging.