MiTAC Pluto E220 - Page 37

2.7 Network Stack Configuration
Main
Advanced
Device Chipset Secur Boot
ity
Save & Exit
Network Stack [Enabled]
Ipv4 PXE Support [Enabled]
Ipv6 PXE Support [Enabled]
PXE boot wait time 0
Item help
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Version 2.15.1326. Copyright (C) 2012 American Megatrends, Inc.
Field Name
Network Stack
Default Value
[Enabled]
Possible Value
Disabled
Enabled
Help
Enable/Disable UEFI Network Stack
Field Name
Ipv4 PXE Support
Default Value
[Enabled]
Possible Value
Disabled
Enabled
Help
Enable Ipv4 PXE Boot Support. If disabled IPV4 PXE boot option
will not be created.