MiTAC Pluto E220 - Page 55

Default Value
[Disabled]
Possible Value
Disabled
Enabled
Help
Control the USB EHCI (USB 2.0) functions. One EHCI controller
must always be enabled
Field Name
USB Per Port Control
Default Value
[Enabled]
Possible Value
Disabled
Enabled
Help
Control each of the USB ports (0~3). Enable:Enable USB per por
Disable: Use USB port X settings
Field Name
USB Port 0
Default Value
[Enabled]
Possible Value
Disabled
Enabled
Help
Enable / Disable USB Port 0
Field Name
USB Port 1
Default Value
[Enabled]
Possible Value
Disabled
Enabled
Help
Enable / Disable USB Port 1
Field Name
USB Port 2
Default Value
[Enabled]
Possible Value
Disabled
Enabled
Help
Enable / Disable USB Port 2
Field Name
USB Port 3~5
Default Value
[Enabled]
Possible Value
Disabled
Enabled
Help
Enable / Disable USB Port 3~5