MiTAC Pluto E220 - Page 57

5. Security
Main Advanced Device Chipset
Security
Boot Save & Exit
Password Description
If Only the Administrator's password is set
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User’s password is set, then this
Is a power on password and must be entered to
boot or enter Setup. In Setup the User will.
have Administrator rights.
The password length must be
in the following range:
Minimum Length 3
Maximum Length 20
Administrator Password
User Password
HDD Security Configuration
P0:WDC WD6400AA
►Secure Boot menu
►Secure Flash Update
Item help
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Version 2.15.1326. Copyright (C) 2012 American Megatrends, Inc.
Field Name
Administrator Password
Help
Set Administrator Password
Comment
Press Enter when selected to go into the associated Sub-Menu.
Field Name
User Password
Help
Set Setup User Password.
Note: Only can modify System Date, System Timer, I217, and
I210 options if User Password.
Comment
Press Enter when selected to go into the associated Sub-Menu.