MiTAC Pluto E220 - Page 72

devices required to launch active boot option. Has no effect for
BBS boot options.
Field Name
VGA Support
Default Value
[EFI Driver]
Possible Value
EFI Driver / Auto
Help
If Auto, only install Legacy OpRom with Legacy OS and logo
would NOT be shown during post. Efi driver will still be installed
with EFI OS.
Field Name
PS2 Devices Support
Default Value
[Enabled]
Possible Value
Enabled
Disabled
Help
If Disabled, PS2 devices will be skipped.
Field Name
NetWork Stack Driver Support
Default Value
[Enabled]
Possible Value
Enabled
Disabled
Help
If Disabled, NetWork Stack Driver will be skipped.
Field Name
Alternate Boot Sequence
Default Value
[<F12> Key]
Possible Value
Disable / <F12> Key
Help
Specifies whether a Magic Packet(TM) powering on the system,
pressing <F12> during the POST, or both, will cause the normal
boot sequence to be skipped and a LAN-only boot to be
attemped. If Boot Other Device is enabled, other boot devices
are tried if LAN boot fails.
Field Name
Boot Other Device
Default Value
[Disabled]
Possible Value
Enabled
Disabled
Help
If enabled, the system will try booting all device categories if the
normal boot priority fails.