MITACA M9 - Using the Machine; Filling the Water Tank

19
Fill the tank
•Take out the tank (8), rotating it outward
and lifting it upward. (Fig.1)
• Fill the tank with water to a maximum
of 2.5 litres, taking care not to exceed the
MAX level marked on the tank (Fig.2)
• Replace the tank, tilting it slightly and
resting it on the water valve. Press the top
of the machine until you hear a click. To
avoid water leakages, check that the tank
is firmly secured. (Fig.3)
Use of the machine
8
8
Fig. 1
Fig. 2
8
Fig. 3
ATTENTION:
OPTIONAL WATER SOFTENER
FILTER
It is strongly recommended to use a
water softener filter to preserve correct
machine operation and the quality of
the product in the cup.