The DigiFlex™ Frequency Meter 2.0 incorporates
a lithium-ion battery management system that
continuously monitors the charge rate and discharge
level of the battery.
The status of the battery and charging are displayed on
the upper right side of the LCD display as shown. See
image 5.
You can use the supplied USB cable to connect
your DigiFlex™ Frequency Meter 2.0 to a computer
for charging the battery. To charge your DigiFlex™
Frequency Meter 2.0 from a power outlet, you will need
the provided AC adapter. See image 6.
The Mini USB plug Connect to the DigiFlex™ Frequency
Meter 2.0
The USB plug Connect to a PC USB port or an AC adapter
with a USB port.
* The position of the charging port is on the back of the
DigiFlex™ Frequency Meter 2.0. See image 7.
image 5
image 6
image 7
To Next Page
Loading...