MITECH mt180 User Manual

Mul-ti Mode
Ultrasonic Thickness Gauge
MT180/190
User’s Manual
MITECH CO.,LTD.
www.mitech-ndt.com

MITECH mt180 Specifications

General

Model	MT180
Operating Frequency	5MHz
Units	mm/inch
Resolution (mm)	0.1mm
Display	LCD
Operating Temperature	0°C - 40°C
Operating Humidity	＜85%RH
Storage Temperature	-10°C - 60°C

Summary

1 Overview

1.1 Product Specifications

1.2 Main Functions

1.5 Operating Conditions

2 Structure Feature

2.2 Keypad Definitions

3 Preparation

3.1 Transducer Selection

Guides users on choosing the appropriate transducer for different materials and applications.

3.2 Condition and Preparation of Surfaces

Details how to prepare test surfaces for accurate ultrasonic measurements.

4 Operation

4.1 Power On/Off

Instructions for turning the ultrasonic thickness gauge on and off.

4.2 Setting the Measurement Mode

4.3 Perform Probe Zero

Describes the procedure for zeroing the transducer for accurate readings.

4.4 Sound Velocity Calibration

Guides on calibrating the gauge to specific material sound velocities for accuracy.

4.5 Making Measurements

Step-by-step instructions for taking thickness measurements with the gauge.

4.6 Scan mode

4.9 Memory Management

Appendix B Applications Notes