Product: MITO LIGHT® LED lamps
Models: Bulb 3.0, Starter 3.0, Expert 3.0, Biohacker 3.0, Mitohacker 3.0
Manufacturer: MITO LIGHT Logistics s.r.o.
Simerova 428/3, Doudlevce, 301 00 Pilsen, Czech Republic
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of
26 February 2014 on the harmonisation of the laws of the Member States relating
to electromagnetic compatibility (EMC)
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of
26 February 2014 on the harmonisation of the laws of the Member States relating
to the making available on the market of electrical equipment designed for use within
certain voltage limits (LVD)
DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of
8 June 2011 on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS)
References to the relevant harmonised standards used, or references to the other
technical specications, including the date of the specication, in relation to which
conformity is declared:
EN 60335-1:2012/AC:2014/A11:2014/A13:2017/A1:2019/A14:2019/A2:2019/A15:2021
EN 60335-2-27:2013/A1:2020/A2:2020/AC:2021-11
EN 62471:2008
EN 61000-3-3:2013
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A1:2019/A2:2021/AC:2022-01
This Declaration of Conformity becomes void in the event of changes to mentioned
product that have not been approved by manufacturer.
Signed for and on behalf of: MITO LIGHT Logistics s.r.o.
Karel Mencl, executive director
In Pilsen, 10/8/2023
To Next Page
