EasyManua.ls Logo

MITO LIGHT BULB 3.0 - How to Use the Device

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Follow the safety instructions.
2. Fix the fully unpacked device in the stable position you will use.
3. Screw in the device into the E27 thread on the power cable.
4. Plug the power cable into an electrical outlet.
5. Switch on the device using the switch on the power cable.
6. Expose yourself to light without clothes at a distance of 15 - 50 cm
from the light for 10 - 20 minutes per day.
- According to customer feedback, most users do not use protective
goggles and only keep their eyes closed during shining. However, always
wear protective goggles unless otherwise instructed by your physician.
- With a shorter distance from the light, a shorter illumination time is needed,
and vice versa.
- This one light application applies to one illuminated area. One area can be
illuminated 1 - 2 times per day. If the same area is illuminated, we recommend
a total time of no more than 30 minutes per day.
7. When you have nished using it, rst turn o the power switch and then
pull the mains plug out of the socket. This completely disconnects the device
from the power supply.
How to use
the device

Related product manuals