To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric CITY MULTI PUMY-P112VKM6 and is the answer not in the manual?
General| Series | CITY MULTI |
|---|---|
| Type | Heat Pump |
| Cooling Capacity (kW) | 11.2 |
| Heating Capacity (kW) | 12.5 |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | -5°C to 46°C |
| Power Supply | 50Hz |
| Indoor Unit Compatibility | Compatible with indoor units |
Details precautions for units using R410A refrigerant, including preparation and service procedures.
Covers requirements for R410A refrigerant piping, including thickness and flare nut dimensions.
Provides specifications for outdoor units, including capacity, operating temperatures, and model identification.
Guides on selecting indoor and outdoor units for cooling and heating, including calculation methods.
Provides correction curves for capacity based on refrigerant piping length for cooling and heating.
Lists essential checks and procedures to be completed before performing a unit test run.
Provides guidance on identifying and resolving error codes that occur during system test runs.
Covers the importance of preventing R410A refrigerant leaks and managing concentration levels.
Describes the functions and interface of the remote controller for system operation.
Explains how to check and interpret error codes displayed by the remote controller.
Details the procedure for performing a test run of the system using the remote controller.
Guides on using the self-diagnosis function to check unit status and identify errors.
