To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric FR-CS82S-070 and is the answer not in the manual?
General| Overload Capacity | 150% for 60 seconds |
|---|---|
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault, Short Circuit |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | 1000 m or less |
Explains the necessary peripheral devices and their connection to the inverter.
Discusses EMI and leakage currents, and measures to reduce them.
Explains the purpose and handling of magnetic contactors for power shutdown.
A checklist of important points to verify before starting inverter operation.
Implementing failsafe systems using inverter status output signals for safety.
Configures acceleration and deceleration times and patterns for smooth motor operation.
Defines how start commands and frequency commands are received by the inverter.
Configures various protective functions to safeguard the inverter and motor.
Explains how inverter faults are indicated on the PU and the general behavior during faults.
Procedures for resetting the inverter after a protective function has been activated.
How to view and clear the stored fault history records.
Troubleshooting guide for various error messages, warnings, and faults.
General troubleshooting steps to perform before diagnosing specific issues.
