Mitsubishi Electric FR-CS84-036 User Manual

INVERTER
INVERTER FREQROL-CS80 INSTRUCTION MANUAL (DETAILED)
B
HEAD OFFICE: TOKYO BUILDING 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
IB(NA)-0600721ENG-B(1610)MEE Printed in Japan Specifications subject to change without notice.
FREQROL-CS80
INSTRUCTION MANUAL (DETAILED)
FR-CS84-012 to 295
FR-CS82S-025 to 100
MODEL
FR-A800
INSTRUCTION MANUAL
MODEL
CODE
XXX-XXX

Mitsubishi Electric FR-CS84-036 Specifications

General

Brand	Mitsubishi Electric
Model	FR-CS84-036
Category	Inverter
Language	English

Summary

Chapter 1 Introduction

1.1 Product checking and accessories

Verifies the inverter model and ensures the product is intact upon delivery.

Chapter 2 Installation and Wiring

2.1 Peripheral devices

2.3 Installation of the inverter and enclosure design

Details requirements for inverter installation and enclosure design for optimal performance and reliability.

2.4 Terminal connection diagrams

Illustrates the wiring diagrams for both main and control circuits for proper connection.

2.5 Main circuit terminals

Explains the function and layout of the main circuit terminals for power connections.

2.6 Control circuit

Details the control circuit terminals, input signals, and output signals for proper wiring.

Chapter 3 Precautions for Use of the Inverter

3.1 Electro-magnetic interference (EMI) and leakage currents

3.4 Power shutdown and magnetic contactor (MC)

3.6 Checklist before starting operation

A comprehensive checklist to ensure correct installation and handling before initial operation.

3.7 Failsafe system which uses the inverter

Explains how to implement interlocks using inverter status output signals for enhanced safety and reliability.

Chapter 4 Basic Operation

4.1 Operation panel

Details the components and basic functions of the inverter's operation panel for user interaction.

Chapter 5 Parameters

5.1 Parameter list

5.4 (F) Setting of acceleration/deceleration time and acceleration/deceleration pattern

Configures the motor's acceleration and deceleration characteristics for smooth operation.

5.5 (D) Operation command and frequency command

Defines how start commands and frequency commands are input to the inverter.

5.6 (H) Protective function parameter

Parameters for configuring the inverter's various protective functions against faults and abnormal conditions.

5.8 (T) Multi-function input terminal parameters

5.9 (C) Motor constant parameters

5.11 (N) Communication operation parameters

5.12 (G) Control parameters

Chapter 6 Protective Functions

6.1 Inverter fault and indication

6.2 Reset method for the protective functions

6.4 List of fault indications

6.5 Causes and corrective actions

Provides detailed troubleshooting information for various error messages and warnings.

6.6 Check first when you have a trouble

A guide to initial checks and troubleshooting steps for common operational issues.