Mitsubishi Electric FR-F800 Safety Stop Function Instruction Manual

INVERTER
FR-A800/F800
Safety Stop Function Instruction Manual
CONTENTS
1. GENERAL DESCRIPTION ............................................ 2
2. INSTALLATION AND WIRING...................................... 3
3. EXAMPLE OF SAFETY SYSTEM CONFIGURATION .... 7
4. TEST AND CHECKING FAILURE ............................... 10
5. SAFETY PARAMETERS OF FR-A800/F800 ................ 11

Mitsubishi Electric FR-F800 Specifications

General

Series	FR-F800
Type	Inverter
Overload Capacity	150% for 60 seconds
Storage Temperature	-20°C to +65°C
Enclosure Rating	IP20
Input Voltage	200-240V AC
Output Voltage	0-Input Voltage
Output Frequency	0-400Hz
Control Method	V/F control, Vector Control
Communication Options	RS-485, Ethernet, CC-Link, Profibus
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload, Ground Fault, Short Circuit
Braking Unit	Built-in
Cooling Method	Fan Cooled
Operating Temperature	-10°C to +50°C
Humidity	95% RH (non-condensing)
Altitude	Up to 1000m