Mitsubishi Electric FX3U-ENET - Page 274

App - 7
MELSEC-F
APPENDIX
App - 7
(3) FX Configurator-EN settings
Set the PLC parameters as follows.
(a) Operation settings
(b) Open settings
Communication data code : ASC II
Initial timing : Always wait for OPEN (Communication
possible at STOP time)
IP address : 172.16.56.99 (AC.10.38.63
H)
Protocol : TCP
Open system : Unpassive (MC)
Fixed buffer : Send
Fixed buffer communication
procedure
: Procedure exist (MC)
Pairing open : Disable
Existence confirmation : No confirm
Local station Port No. : 10000