Need help?Do you have a question about the Mitsubishi Electric FX3U-1PG and is the answer not in the manual?
General| Type | Positioning Module |
|---|---|
| Number of control axes | 1 |
| Current consumption | 100 mA |
| Power supply voltage | 24 VDC |
| Input Voltage | 24V DC |
| Operating Temperature | 0 to 55°C |
| Power supply | 24V DC |
| Isolation | Photocoupler isolation |
Guidelines for designing safe systems using the PLC, considering potential failures.
Safety measures required before and during the installation of the product.
Essential safety measures to follow when performing wiring procedures.
Safety precautions related to powering up, operating, and maintaining the product.
Crucial safety guidelines to follow before and during the installation process.
Essential safety precautions for wiring the FX3U-1PG and connected equipment.
Explains how positioning operations relate to buffer memory settings.
Describes how the STOP command functions in different positioning operations.
Provides important warnings and considerations for positioning operations.
A comprehensive list of all buffer memory addresses and their functions.
Defines parameters for controlling positioning operations, including extended ranges.
Covers data used for controlling the positioning process, like starting delay time.
Details how to perform manual jogging movements of the motor.
Explains the procedures and types of mechanical zero return operations.
Details the standard single-speed positioning operation.
Explains positioning with interruption and speed changes.
Describes positioning with two distinct speed stages.
Covers positioning operations controlled by external commands.
Explains how to adjust speed dynamically during operation.
Details how to interrupt and stop a positioning operation.
Describes positioning with two speeds and interrupt capabilities.
Provides a full sequence program example for the FX3U-1PG.
Explains LED status indicators and corrective actions for troubleshooting.
Lists error codes, their meanings, and corrective actions.
Describes how to diagnose issues using PLC main unit LEDs.
To Next Page
