To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric Mr. Slim MSZ-GE06NA and is the answer not in the manual?
General| Cooling Capacity | 6, 000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Type | Split System Air Conditioner |
| Power Supply | 115V, 60Hz |
| Operating Temperature (Heating) | 75°F |
Explains the meaning of symbols used in the manual for safe operation and warnings.
Provides critical safety warnings regarding power connection, cords, and improper handling to prevent fire and electric shock.
Outlines cautions for user safety, such as avoiding touching certain parts, using approved materials, and preventing damage.
Details specific user precautions such as not stepping on unstable surfaces, handling batteries safely, and usage in humid environments.
Advises on ensuring proper ventilation with combustion appliances and taking precautions during thunderstorms for unit safety.
Warns against DIY installation, requires dedicated power supply, and ensures correct grounding to prevent hazards.
Recommends GFI circuit breakers for humid areas and ensures proper drainage to prevent water damage.
Identifies and illustrates the different parts of the indoor unit, including filters, panels, and outlets.
Illustrates the components of the outdoor unit, such as air inlet, outlet, piping, and drainage.
Details the parts and functions of the remote controller, including display, buttons, and signal transmission.
Guides on correctly inserting batteries into the remote controller for proper function and longevity.
Provides instructions on how to set the current time on the remote controller for timer functions.
Explains how to switch the temperature display between Fahrenheit (°F) and Celsius (°C) using the remote controller.
Describes AUTO, COOL, DRY, and HEAT modes, explaining their functions and optimal usage conditions.
Details how to operate the unit using the emergency switch on the indoor unit when the remote is unavailable.
Explains the meaning of the operation indicator lamp states for monitoring the unit's status.
Describes the auto restart feature that resumes operation after a power failure with previous settings.
Explains how to adjust fan speed using the remote controller for optimal cooling or quiet operation.
Guides on adjusting the horizontal and vertical vanes for desired airflow direction and preventing condensation.
Explains how to save and recall preferred temperature, fan speed, and airflow settings for convenience.
Details the ECONO COOL mode, which provides comfortable cooling with energy savings by automatically adjusting airflow and temperature.
Provides instructions on setting the ON and OFF timers for automated operation of the air conditioner.
Instructions for cleaning the Catechin air filter every two weeks and the Air cleaning filter every three months.
Steps for safely removing and cleaning the front panel of the indoor unit.
Lists common symptoms related to the indoor unit and provides check points and explanations for resolving issues.
Addresses problems with the remote controller display and response, offering troubleshooting steps.
Details troubleshooting for outdoor unit issues like fan operation, water leakage, and mist discharge.
Explains causes for abnormal airflow direction changes, strange smells, and various operational sounds.
Steps to prepare the unit for long-term storage, including drying and removing batteries.
Advises on suitable places for installation, avoiding areas with oil, gas, or potential interference.
Details electrical safety requirements, including dedicated circuits and breaker capacity for installation.
Lists the indoor and outdoor operating temperature and humidity ranges for optimal performance.
