To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric Mr.SLIM PUZ-A NHA7 Series and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr.SLIM PUZ-A NHA7 Series |
| Category | Air Conditioner |
| Language | English |
Precautions for electrical work, including circuit breakers and cable capacity.
Steps before test run, including power supply timing and panel checks.
Specific safety measures for R410A refrigerant, oils, and piping.
Limits for pipe length, height difference, and bends for different models.
Guidelines for choosing a suitable outdoor unit installation location.
Guidelines for ventilation and service space around the outdoor unit.
Clearance requirements for single outdoor unit installations with obstacles.
Spacing requirements for multiple outdoor units in various configurations.
Specific safety precautions for R410A refrigerant systems.
Instructions for connecting refrigerant pipes, including insulation and flare nut torque.
Procedures for connecting refrigerant pipes, including panel removal and vacuum purging.
Method for testing refrigerant pipes for leaks using pressure.
How to operate and maintain stop valves for refrigerant control.
Procedure for adding refrigerant based on pipe length and height difference.
Wiring instructions for the outdoor unit's electrical connections.
Detailed wiring specifications for outdoor and indoor units by model.
Checks and preparations required before performing the test run.
Procedures for conducting the test run for PUZ and PUY type units.
How to activate low noise operation mode through modifications.
How to activate demand function to reduce energy consumption.
Procedure for collecting refrigerant (pump down) when moving units.
