Need help?Do you have a question about the Mitsubishi Electric Mr.Slim PUZ-ZM YKA Series and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Series | PUZ-ZM YKA |
| Power Source | Varies by model (e.g., 220-240V, 380-415V) |
| Cooling Capacity | Varies by model (e.g., 2.5kW, 3.5kW, 5.0kW, 6.3kW, 7.1kW, 8.0kW) |
| Heating Capacity | Varies by model (e.g., 3.2kW, 4.0kW, 6.0kW, 7.1kW, 8.0kW, 9.0kW) |
| Noise Level (Indoor Unit) | Varies by model (e.g., 30 dB(A) to 45 dB(A)) |
| Indoor Unit Dimensions (HxWxD) | Varies by model |
| Outdoor Unit Dimensions (HxWxD) | Varies by model |
| Indoor Unit Weight | Varies by model |
| Outdoor Unit Weight | Varies by model |
General precautions to take before commencing the installation of the unit.
Precautions for handling and installing the unit during relocation.
Important safety checks and procedures for electrical wiring.
Essential checks before initiating the test run of the air conditioner.
Specific safety measures and material specifications for R32 refrigerant.
Details and installation instructions for outdoor unit accessories.
Guidelines for refrigerant pipe length, height difference, and bends.
Criteria for selecting an appropriate installation site for the outdoor unit.
Provides the physical dimensions and outlines of the outdoor unit.
Instructions for installing the outdoor unit in windy conditions.
Minimum clearance requirements for single outdoor unit installations.
Clearance requirements for installing multiple outdoor units side-by-side.
Specifies minimum installation space requirements based on refrigerant quantity.
Guidelines for installing indoor units based on refrigerant quantity and height.
Essential safety measures and material specifications for R32 refrigerant piping.
Instructions for connecting refrigerant pipes, including insulation and tightening.
Procedures for connecting refrigerant pipes, vacuum purging, and leak testing.
Methodology for testing the refrigerant piping system for leaks under pressure.
Procedure for correctly opening and closing the stop valves on the outdoor unit.
Guidelines for calculating and adding refrigerant based on pipe length.
Calculating additional refrigerant charge for piping lengths over 70 meters.
Refrigerant charging amounts for various pipe lengths up to 30 meters.
Guidelines for reusing existing R22 refrigerant pipes with new units.
Refrigerant piping restrictions for multi-unit systems.
Wiring diagrams and procedures for connecting the outdoor unit.
Detailed specifications and guidelines for field electrical wiring.
Pre-test run checks including insulation resistance and wiring.
Procedures for conducting the test run for cooling and heating operations.
Instructions for performing the test run using the remote controller.
Procedure for enabling low noise mode for reduced outdoor unit operation noise.
How to activate and set the demand function to reduce energy consumption.
Steps for collecting refrigerant before moving the unit.
To Next Page