To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MS-A09WA-1 and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240V, 50Hz |
| Weight (Indoor Unit) | 9 kg |
| Noise Level (Outdoor) | 50 dB |
Defines WARNING and CAUTION labels for potential hazards and their implications.
Explains the meaning of various symbols used in the manual for instructions and warnings.
Identifies the air outlet, filters, heat exchanger, and display section of the indoor unit.
Identifies the air inlet, piping, and drainage hose of the outdoor unit.
Details the buttons and display of the remote controller for operation.
Instructions for inserting AAA alkaline batteries into the remote controller.
Guide to setting the current time on the remote controller using RESET and CLOCK buttons.
Procedure to switch between Fahrenheit (°F) and Celsius (°C) temperature units.
Details the different operating modes for cooling, dehumidifying, and air circulation.
Manual operation activated via the indoor unit's E.O.SW button when remote is unavailable.
Explains the meaning of the indoor unit's operation indicator lamp states.
Describes the unit's ability to resume operation after a power interruption.
Instructions on selecting fan speed from AUTO, Low, Medium, or High.
Guide to selecting airflow direction from AUTO, positions (1)-(4), or SWING.
Procedure to manually adjust the horizontal vane direction before operation.
Procedure to activate or deactivate the ECONO COOL energy-saving mode.
Explanation of how ECONO COOL uses airflow to maintain comfort while saving energy.
Instructions for setting the unit to turn ON or OFF at a specified time.
Instructions for cleaning the Anti-Allergy Enzyme Filter every 3 months.
Instructions for cleaning the Catechin air filter every 2 weeks.
Explanation of the benefits and properties of the Catechin air filter.
Common issues with the indoor unit and their possible causes and solutions.
Common issues related to the outdoor unit during operation.
Troubleshooting steps for problems with the remote controller display or signal.
Addressing unusual airflow patterns or sounds from the unit.
Steps to prepare the unit for storage when not in use for an extended period.
Checks required before restarting the air conditioner after long-term storage.
Guidance on suitable and unsuitable locations for installing the air conditioner.
Requirements for providing an exclusive power circuit and observing breaker capacity.
