To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-AY25VGKP and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240 V, 50 Hz |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 285 mm |
| Refrigerant | R32 |
| Type | Split |
| Energy Efficiency Class Cooling | A |
| Energy Efficiency Class Heating | A |
| Indoor Unit Dimensions (W x H x D) | 798 x 295 x 223 mm |
| Sound Power Level (Heating) | 63 dB(A) |
| Noise Level (Indoor Unit) | 19 dB |
Explains meanings of symbols on the unit and in the manual, including warning and caution marks.
Provides critical warnings regarding electrical safety, power cord handling, and proper operation to prevent hazards.
Identifies and illustrates the various parts of the indoor unit.
Details the components and functions of the remote controller.
Illustrates and describes the parts of the outdoor unit.
Instructions for correctly inserting batteries into the remote controller.
Guide on how to set the current time on the remote controller.
Procedure to set the remote controller exclusively for a particular indoor unit.
Dehumidifies the room; temperature cannot be set during this mode.
Provides warm air at the desired temperature.
Circulates air within the room without cooling or heating.
Unit automatically selects operation mode based on room temperature.
Provides cool air at the desired temperature.
Guide on selecting fan speed from silent to super high.
Controls the vertical direction of airflow.
Controls the horizontal direction of airflow.
Instructions for programming daily ON/OFF timers for the entire week.
Guide to view programmed weekly timer settings.
Procedure for cleaning the air filters regularly for optimal performance.
Instructions for cleaning the front panel of the indoor unit.
Guide for cleaning the air purifying device found in VGKP models.
Recommendation to replace the air cleaning filter annually for best performance.
Explains the two methods (WPS-PUSH, Access Point) for pairing the Wi-Fi interface with a router.
Step-by-step guide to set up the Wi-Fi interface using the WPS-PUSH method.
Instructions for connecting your smartphone to the air conditioner via Wi-Fi.
Lists common symptoms and checks for indoor unit malfunctions.
Identifies common issues related to the outdoor unit's operation.
Addresses problems with the remote controller's display or signal reception.
Troubleshooting for insufficient cooling or heating performance.
Explains various sounds the unit may make and their potential causes.
Diagnoses problems with weekly or ON/OFF timer settings.
Details troubleshooting steps for Wi-Fi® interface connectivity problems.
Recommends suitable locations and advises against unsuitable installation sites.
Specifies requirements for electrical work, including dedicated circuits.
Presents technical data for indoor and outdoor units including capacity and noise levels.
Details the technical specifications for the Wi-Fi® interface module.
