To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-FH18NA and is the answer not in the manual?
General| Cooling Capacity | 18, 000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Type | Split System |
| Indoor Unit Noise Level | 19 dB(A) |
| HSPF | 10.0 |
| Power Supply | 208/230V, 60Hz |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Operating Temperature (Heating) | -13°F to 75°F |
Describes symbols, basic usage rules, and initial safety statements.
Covers power cord, plug, grounding, and breaker usage to prevent shock and fire.
Covers user actions like avoiding direct airflow, battery handling, cleaning, and special use cases.
Covers safe practices during unit installation, including power supply and gas leaks.
Instructions on what to do if the unit malfunctions or exhibits unusual behavior.
Identifies key parts of the indoor and outdoor units for user reference.
Details the layout and functions of all buttons on the remote control.
Provides guidance on mounting the remote controller holder.
How to configure the remote for the installed unit's location.
Energy-saving mode activated when no occupants are detected in the room.
Fine-tuned airflow based on occupant location for enhanced comfort.
Room temperature controlled by sensible temperature readings.
Automatic changeover between cooling, heating, and fan modes based on room temperature.
Descriptions of cooling, dehumidification, and heating operations.
Explains circulating air within the room for ventilation.
How to operate the unit manually without the remote control.
Automatic restart feature after power interruptions or outages.
Controls fan speed from AUTO to Super High for desired airflow.
Adjusts horizontal vane direction for optimal air distribution.
Controls the width of the airflow for better room coverage.
Storing and recalling preferred settings for quick, personalized access.
Examples for low energy mode and saving frequently used settings.
Energy-saving cooling using swing airflow for enhanced comfort.
Explains how Econo Cool enhances comfort and saves energy.
Mimics natural breeze for reduced discomfort from constant airflow.
Describes the effect of changing airflow and wind velocity.
Quick cooling or heating with exclusive high-speed settings.
Instructions for setting simple ON and OFF timers for automatic operation.
Configuring up to 28 ON/OFF timers per week with specific schedules.
Verifying the programmed weekly timer schedule for accuracy.
Safety and essential tips for cleaning the unit components.
Procedures for cleaning Nano Platinum, Air Cleaning, and Deodorizing filters.
Common issues and solutions for the indoor unit and remote controller.
Troubleshooting cooling, heating, and airflow related malfunctions.
Diagnosing unusual sounds and timer operation errors.
Issues with the outdoor unit and guidance on when to contact a dealer.
Steps to take before not using the air conditioner for an extended period.
Procedures for bringing the unit back into service after storage.
Recommendations and warnings for selecting an optimal installation site.
Guidance on power supply and circuit considerations for safe installation.
