To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-GE80VAD and is the answer not in the manual?
General| Cooling Capacity | 8.0 kW |
|---|---|
| Heating Capacity | 9.0 kW |
| Power Supply | 220-240 V |
| Refrigerant | R410A |
| Type | Split System |
| Power Supply Frequency | 50 Hz |
Explains warning and caution symbols used in the manual.
Details the significance of various safety icons and directives within the document.
Covers essential safety precautions for operating the air conditioner correctly and safely.
Highlights critical safety information and potential hazards.
Provides essential safety guidelines and warnings specific to the installation process.
Identifies and labels components of the indoor unit.
Identifies and labels components of the outdoor unit.
Details the parts and functions of the remote control unit.
Guides on how to insert batteries into the remote controller correctly.
Instructions on setting the current time on the remote controller.
Explains automatic mode selection based on room temperature.
Instructions for operating the unit to provide cool air.
Instructions for dehumidifying the room.
Instructions for operating the unit to provide warm air.
Instructions for circulating air within the room.
How to operate the unit when the remote controller is unavailable.
Explains the meaning of the indicator lamps on the unit.
Describes the unit's behavior after a power interruption.
How to adjust the fan speed for optimal comfort and quiet operation.
How to adjust the vertical airflow direction using the remote.
How to adjust the horizontal airflow direction using the remote.
Details on setting airflow for efficient cooling, heating, and preventing condensation.
Step-by-step guide to program daily ON/OFF times and temperatures for a week.
How to review and confirm programmed weekly timer settings.
Instructions for cleaning the air filter every two weeks.
Guidelines for cleaning or replacing the air cleaning filter.
How to open and clean the front panel of the indoor unit.
Procedures for cleaning the air outlet and fan components.
Instructions for cleaning the heat exchanger, possibly with an optional kit.
Troubleshooting symptoms and checks for the indoor unit.
Troubleshooting common issues with the remote controller.
Addresses insufficient cooling or heating performance issues.
Troubleshooting problems related to air output and direction.
Explains normal and abnormal sounds the unit might make.
Troubleshooting issues with timer operations.
Recommends suitable and unsuitable locations for installing the unit.
Provides guidelines for proper electrical connections and safety precautions.
