To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MUZ-FS06NAH-U1 and is the answer not in the manual?
General| Voltage | 208/230V |
|---|---|
| Type | Heat Pump |
| Cooling Capacity | 6, 000 BTU |
| SEER | 33.1 |
| HSPF | 14.2 |
| Sound Level | 19 dB(A) (Indoor, Quiet Mode) |
| Seasonal Energy Efficiency Ratio (SEER) | 33.1 |
| Operating Temperature (Heating) | 75°F |
Provides detailed performance data for cooling capacity under various conditions.
Specifies cooling capacity figures based on indoor and outdoor air conditions.
Lists correction factors for cooling capacity based on refrigerant piping length.
Lists correction factors for heating capacity based on refrigerant piping length.
Provides heating capacity figures under various indoor and outdoor air conditions.
Explains the control logic for the outdoor fan motor based on compressor operation.
Details the control sequence for the 4-way reversing valve (R.V. coil).
Shows how sensors interact with actuators for system control.
Instructions for adjusting the defrost finish temperature settings.
Guidance on activating and configuring the pre-heat control for low-temperature operation.
Important safety and preliminary checks before performing troubleshooting.
Diagnostic steps for checking the inverter and compressor functionality.
Procedure to diagnose issues with the inverter P.C. board, including fuse and LED checks.
