Mitsubishi Electric MV2400R User Manual

MV Series
Series
Wire-cut EDM Systems
MV Series
K-KL2-2-C0091-A NA1203 Printed in Japan
(
MDOC
)
* Not all models are supported for all countries and regions.
* Machine specifications differ according to the country and region, so please check with your dealer.
* Processing data provided in this brochure is for reference only.
HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS: 1-14, YADA-MINAMI, 5-CHOME, HIGASHI-KU, NAGOYA 461-8670, JAPAN
Mitsubishi Electric Corporation Nagoya Works is a factory certified for ISO14001
(standards for environmental management systems) and ISO9001(standards for
quality assurance management systems)
New publication, effective Apr. 2012.
Specifications are subject to change without notice.

Mitsubishi Electric MV2400R Specifications

General

X-Axis Travel	400 mm
Y-Axis Travel	300 mm
U-Axis Travel	±60 mm
V-Axis Travel	±60 mm
Type	Wire EDM
Wire Diameter	0.1mm - 0.3mm
Input Frequency	50Hz - 60Hz
Protection Features	Overload
Humidity	80% RH or less (no condensation)