To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MXZ-4C36NA and is the answer not in the manual?
General| Type | Multi-Zone Heat Pump |
|---|---|
| Series | MXZ |
| Cooling Capacity (BTU) | 36000 |
| HSPF | 10.0 |
| Refrigerant | R410A |
| Maximum Number of Zones | 4 |
| Sound Level (dB) | 49 |
| Voltage | 208 / 230 V |
| Phase | Single |
| Power Supply | Outdoor Unit |
| Indoor Unit Noise Level | Varies by indoor unit |
| Outdoor Unit Noise Level | 49 dB |
| Indoor Unit Dimensions (HxWxD) | Varies by model |
| Indoor Unit Weight | Varies by model |
| Heating Capacity (BTU) | 41000 |
General safety guidelines for repair services, including preparation and precautions.
Specific safety precautions when working with R410A refrigerant.
Specifies the guaranteed voltage range for the outdoor unit.
Details the operating conditions for cooling and heating modes.
Details outdoor low pressure and unit current during cooling operation.
Details outdoor low pressure and unit current during heating operation.
Instructions on how to perform fixed-frequency operation for the unit.
Describes the relationship between sensors and actuators in the system.
Explains how to control pre-heating to improve compressor start-up.
Safety precautions and preliminary checks before troubleshooting.
How to recall and interpret failure modes from the unit's memory.
Diagram and voltage test points for the outdoor control P.C. board.
Step-by-step guide to remove the cabinet and panels of the outdoor unit.
Procedure for removing key internal components like P.C. boards and reactor.
Steps to safely remove the outdoor unit's fan motor.
Detailed instructions for removing the compressor and 4-way valve.
Steps to remove the expansion valve from the outdoor unit.
