Mitsubishi Electric PAC-SF44SRA User Manual

Mitsubishi Electric Building
Air Conditioning Control System
System remote controller Type PAC-SF44SRA
INSTRUCTION BOOK
Carefully read this book before use. It is recommended to safe keep this book for future reference.
ANWEISUNGSHANDBUCH
Vor Benutzung der Anlage dieses Buch sorgfältig durchlesen. Es wird empfohlen, dieses Buch zum Nachschlagen an einem
sicheren Ort aufzubewahren.
MANUEL D'UTILISATION
Lire attentivement le présent manuel avant toute utilisation et le conserver dans un endroit sûr pour pouvoir le consulter
ultérieurement.
LIBRO DE INSTRUCCIONES
Lea cuidadosamente este libro antes de usar el temporizador. Le recomendamos que guarde el libro en lugar seguro en previsión
de consultas Futuras.
LIBRETTO ISTRUZIONI
Leggere attentamente questo libretto prima dell'uso. Si raccomanda di tenerlo in un luogo sicuro per ogni futura necessitá.
INSTRUCTIEHANDLEIDING
Lees deze handleiding aandachtig door voordat u het apparaat in gebruik neemt. Het wordt aangeraden om deze handleiding
zorgvuldig te bewaren om later, indien nodig, te raadplegen.
GBD
FE
INL

Mitsubishi Electric PAC-SF44SRA Specifications

General

Model	PAC-SF44SRA
Brand	Mitsubishi Electric
Type	Remote Control
Compatibility	Mitsubishi Electric Air Conditioners
Display	LCD
Power Source	Battery
Battery Type	AAA
Battery Quantity	2
Functions	Fan Speed, Timer

Summary

1. Safety Precautions

3. Operation

3-1. Collective Setting/Monitor Screen, Group Setting/Monitor Screen

3-2. Various setting methods

Covers various operational settings: ON/OFF, mode, fan speed, temperature, louver, air direction, interlocks, and more.

4. Troubleshooting

4-1. When "COLLECTIVE ON/OFF LAMP" and "ERROR CODE" are flickering

Troubleshooting steps when specific lamps and error codes indicate a serious problem.

4-2. When "group operation status display" and "error code" are flickering

Resolving issues where group status and error codes flicker, indicating potential problems.

6. Initial settings

6-1. When this controller is master system

Detailed steps for initial configuration when the controller acts as the master.

6-1-1. Setting the group

Registering indoor units, LOSSNAY, and controllers into groups.

6-1-2. Setting the interlocked units

7. Error history monitor

Display and monitor methods

Methods for displaying and monitoring saved error history records.

Deleting the error history

8. Setting the functions

8-1. Using with master system controller

8-2. Setting local remote controller operation prohibit function from this controller

8-3. Prohibiting operation of system controller other than this controller

9. Using the external input/output

9-1. External signal input function

9-2. External signal output functions