Mitsubishi Electric PAR-SL97A-E User Manual

Mitsubishi Electric Building
Air Conditioning Control System
Wireless Remote Controller PAR-SL97A-E
INSTRUCTION BOOK
• Read this manual thoroughly before using the remote controller.
• For those who carry out the installation work.
After completing all the work, explain how to operate the remote controller to the customer referring to this manual, then hand the manual over to him.
MANUEL D’UTILISATION
• Veuillez lire attentivement le présent manuel avant d’utiliser la télécommande.
• Pour les personnes chargées des travaux d’installation.
Lorsque les travaux sont terminés, expliquer le fonctionnement de la télécommande au client en se reportant au présent manuel puis lui remettre le manuel.
NOT AVAILABLE
MODEL SELECT
TEST RUN CHECK
ON/OFF
TEMP

Mitsubishi Electric PAR-SL97A-E Specifications

General

Brand	Mitsubishi Electric
Model	PAR-SL97A-E
Category	Remote Control
Compatibility	Mitsubishi Electric Air Conditioners
Display	LCD
Operating Temperature Range	0°C to 50°C

Summary

Safety Precautions

General Safety Precautions

General safety warnings and precautions for installation and use of the remote controller.

Name of Component

Wireless Remote Controller Components

Identifies and explains the various parts and functions of the wireless remote controller.

Signal Receiving Unit

Identifies and explains the signal receiving unit for the air conditioning system.

Before Operation

Remote Controller Installation

Instructions for selecting an installation area and mounting the remote controller holder.

Battery Replacement and Time Setting

Procedure for replacing batteries and setting the current time on the remote controller.

Temperature Display Setting

How to set the temperature display unit (°C/°F).

MODE Display Setting

How to set the operation mode display options.

FAN Display Setting (Stage)

How to set the fan speed display for stage modes.

FAN Display Setting (Auto Mode)

How to set the fan speed display for auto mode.

VANE Display Setting

How to set the VANE airflow direction display.

LOUVER Display Setting

How to set the LOUVER airflow direction display.

Pair Number Setting

How to set the pair number between the remote and receiving units.

Operation

Switching Unit On/Off

Instructions on how to turn the air conditioning unit on and off using the remote.

Mode Selection

How to select different operating modes like cooling, heating, dry, fan.

Temperature Selection

How to adjust the target room temperature for cooling or heating.

Fan Speed Selection

How to choose the fan speed from available options (auto, low, high).

Vertical Airflow Direction (VANE)

How to control the vertical swing and direction of airflow using the VANE setting.

Vertical Airflow Direction (LOUVER)

How to control the horizontal swing and direction of airflow using the LOUVER setting.

Using the Timer

Instructions for setting the current time, start time, and stop time using the timer functions.

Test Run

Test Run Procedure

Steps to perform a test run of the air conditioning system.

Self Check

Self Check Procedure

Procedure for initiating a self-check diagnosis of the air conditioner.

Centrally Controlled

Centralized Control Operations

Information on how centralized control affects remote controller operations.

Troubleshooting

Troubleshooting Guide

Guidance on identifying and resolving common operational issues with the unit.