Why Mitsubishi Electric Air Conditioner airflow direction changes by itself?
During heating mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
What to do if Mitsubishi Electric Air Conditioner shows 'PLEASE WAIT'?
If “PLEASE WAIT” appears in the remote controller display of your Mitsubishi Electric Air Conditioner, the initial settings are being performed. Wait approximately 3 minutes.
Why Mitsubishi Electric Air Conditioner stops before reaching temperature?
If your Mitsubishi Electric Air Conditioner stops before reaching the set room temperature during heating mode, when the outdoor temperature is low and the humidity is high, frost may form on the outdoor unit. Normal operation should begin after approximately 10 minutes.
Why Mitsubishi Electric Air Conditioner vanes move past set position?
If the airflow direction is changed on your Mitsubishi Electric Air Conditioner, the vanes move to the set position after detecting the base position.
Why Mitsubishi Electric Air Conditioner smells bad?
If the room has an unpleasant odor when using your Mitsubishi Electric Air Conditioner, the indoor unit draws in air that contains gases produced from the walls, carpeting, and furniture as well as odors trapped in clothing, and then blows this air back into the room.
Why Mitsubishi Electric Air Conditioner makes draining sound?
If draining water or motor rotation sound is heard from your Mitsubishi Electric Air Conditioner, when cooling operation stops, the drain pump operates and then stops. Wait approximately 3 minutes.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PEA-RP200WKA |
| Category | Automobile Accessories |
| Language | English |
To Next Page
