Why Mitsubishi Electric Air Conditioner stops before reaching temperature?
If your Mitsubishi Electric Air Conditioner stops before reaching the set room temperature during heating mode, when the outdoor temperature is low and the humidity is high, frost may form on the outdoor unit. Normal operation should begin after approximately 10 minutes.
Why does Mitsubishi Electric Air Conditioner emit white mist?
If your Mitsubishi Electric Air Conditioner emits a white mist or vapor from the indoor unit, this may occur when operation starts if the indoor temperature and humidity are high. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
Why Mitsubishi Electric Air Conditioner turns on by itself?
If your Mitsubishi Electric Air Conditioner operates without pressing the ON/OFF button, check if the on timer is set and press the ON/OFF button to stop operation. In case the air conditioner is connected to a central remote controller or if “ ” appears in the remote controller display, consult the concerned people who control the air conditioner. Also, check if the auto recovery feature from power failures has been set and press the ON/OFF button to stop operation.
Why Mitsubishi Electric Air Conditioner turns off by itself?
If your Mitsubishi Electric Air Conditioner stops without pressing the ON/OFF button, check if the off timer is set and press the ON/OFF button to restart operation. If the air conditioner is connected to a central remote controller or if “ ” appears in the remote controller display, consult the concerned people who control the air conditioner.
Why Mitsubishi Electric Air Conditioner not blowing hot air immediately?
When heating operation starts on your Mitsubishi Electric Air Conditioner, warm air does not blow until the indoor unit has sufficiently warmed up.
Why Mitsubishi Electric Air Conditioner won't turn on after turning off?
If you are restarting your Mitsubishi Electric Air Conditioner soon after stopping it and it does not operate even though the ON/OFF button is pressed, wait approximately three minutes. Operation may have stopped to protect the air conditioner.
Why Mitsubishi Electric Air Conditioner makes draining sound?
If draining water or motor rotation sound is heard from your Mitsubishi Electric Air Conditioner, when cooling operation stops, the drain pump operates and then stops. Wait approximately 3 minutes.
Why Mitsubishi Electric Air Conditioner vanes move past set position?
If the airflow direction is changed on your Mitsubishi Electric Air Conditioner, the vanes move to the set position after detecting the base position.
What to do if Mitsubishi Electric Air Conditioner shows 'PLEASE WAIT'?
If “PLEASE WAIT” appears in the remote controller display of your Mitsubishi Electric Air Conditioner, the initial settings are being performed. Wait approximately 3 minutes.
Why Mitsubishi Electric Air Conditioner is leaking water outside?
If your Mitsubishi Electric Air Conditioner emits water or vapor from the outdoor unit during cooling mode, water may form and drip from the cool pipes and joints. During heating mode, water may form and drip from the heat exchanger. During defrosting mode, water on the heat exchanger evaporates and water vapor may be emitted.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PEA-RP250WKA |
| Category | Automobile Accessories |
| Language | English |
To Next Page
