Mitsubishi Electric PEFY-P-VML-E Data Book

133 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Table of Contents

Other manuals for Mitsubishi Electric PEFY-P-VML-E

Operation Manual16 pages

Questions and Answers:

T
Traci SmithAug 19, 2025
Why is my Mitsubishi Electric PEFY-P-VML-E Air Conditioner not cooling or heating enough?
- P
  Paula RobbinsAug 19, 2025
  If your Mitsubishi Electric Air Conditioner does not cool or heat enough, make sure that you have properly set the temperature. Check the inlet temperature on the liquid crystal display and adjust the settings as needed. Also, ensure that the filter is clean, and there are no obstructions blocking the air inlet or outlet of the indoor and outdoor units. Finally, close any open windows and doors.
S
scottkrystalAug 21, 2025
How to fix a Mitsubishi Electric Air Conditioner that does not run?
- A
  Amanda StoneAug 21, 2025
  If your Mitsubishi Electric Air Conditioner doesn't run, first ensure that there isn't a power failure. If there was a power failure, press the [ON/OFF] button. Then, check if the power supply is turned on and that the fuse is intact. Also, check the earth leakage breaker and put it in if it's gone.
M
Mrs. Deanna Fisher DDSAug 23, 2025
Why Mitsubishi Electric PEFY-P-VML-E doesn't cool or heat enough?
- A
  Alan MartinezAug 23, 2025
  There are several reasons why your Mitsubishi Electric Air Conditioner might not be cooling or heating sufficiently: * The temperature might not be adjusted properly. Check the set temperature and inlet temperature on the display and adjust accordingly. * The filter may be clogged with dust and dirt. Clean the filter. * Obstructions might be present at the air inlet or outlet of the indoor and outdoor units. Remove any obstacles. * Windows and doors might be open. Close them to maintain the desired temperature.
O
ochoajamieAug 26, 2025
What to do if Mitsubishi Electric PEFY-P-VML-E Air Conditioner runs briefly, but soon stops?
- J
  Jennifer EllisAug 26, 2025
  If your Mitsubishi Electric Air Conditioner runs briefly and then stops, check for any obstructions at the air inlet and outlet of both the indoor and outdoor units and remove them. Also, clean the filter if it is filled with dust and dirt, and then rerun the system.
A
Adam Cortez DDSAug 27, 2025
Why is no cool or warm air coming out of my Mitsubishi Electric PEFY-P-VML-E?
- T
  Tyler CallahanAug 27, 2025
  If cool or warm air does not come out of your Mitsubishi Electric Air Conditioner, it might be due to the restart-preventing circuit, which takes about 3 minutes to complete its cycle. Please wait for a while. Also, if the indoor unit operation was restarted during the heating and defrosting operation, wait for a while, as heating operation starts after defrosting is completed.
V
Veronica StephensAug 29, 2025
Why can I still hear the exhaust and motor after stopping my Mitsubishi Electric PEFY-P-VML-E Air Conditioner?
- P
  Paula ArmstrongAug 29, 2025
  The sound you hear after stopping your Mitsubishi Electric Air Conditioner is the drain-up mechanism running for 3 minutes after air-cooling operation is stopped, when other indoor units are engaged in cooling operation. Please wait for 3 minutes.
J
Joseph RodriguezAug 31, 2025
Why can I hear the exhaust and motor intermittently after stopping my Mitsubishi Electric PEFY-P-VML-E?
- A
  Amy JonesSep 1, 2025
  The intermittent sound you hear from your Mitsubishi Electric Air Conditioner after it stops running is due to the drain-up mechanism initiating a draining operation when other indoor units are engaged in cooling operation. This should stop soon. If the noise occurs more than 2-3 times in an hour, ask for repair service.
L
Lori RuizSep 3, 2025
Why does warm air come out intermittently from my Mitsubishi Electric PEFY-P-VML-E Air Conditioner when the thermostat is OFF?
- R
  Robert TrujilloSep 3, 2025
  The warm air coming out intermittently from your Mitsubishi Electric Air Conditioner when the thermostat is OFF or during fan operation is because the control valves are opened and closed from time to time to maintain the stability of the system, when other indoor units are engaged in heating operation. This should stop soon. If the room temperature rises uncomfortably high in a small room, stop operation.
J
jparkSep 5, 2025
What to do if my Mitsubishi Electric Air Conditioner does not run?
- E
  Elizabeth LewisSep 5, 2025
  If your Mitsubishi Electric Air Conditioner is not running, consider the following possibilities: * There may have been a power failure. Press the [ON/OFF] button after power is restored. * The power supply might be turned OFF. Turn the power supply ON. * The fuse in the power supply could be blown. Replace the fuse. * The earth leakage breaker may have tripped. Reset the earth leakage breaker.
L
Lee MasonSep 7, 2025
What to do if my Mitsubishi Electric Air Conditioner runs briefly then stops?
- R
  Russell MaysSep 7, 2025
  If your Mitsubishi Electric Air Conditioner runs for a short time and then stops, check for these potential causes: * Obstacles at the air inlet or outlet of the indoor and outdoor units. Remove any obstructions and rerun the system. * A dirty filter filled with dust and dirt. Clean the filter and rerun the system.

Mitsubishi Electric PEFY-P-VML-E Specifications

General

Brand	Mitsubishi Electric
Model	PEFY-P-VML-E
Category	Air Conditioner
Language	English

Related product manuals

CITY MULTI PEFY-P-NMAU-E4

Preview: CITY MULTI PEFY-P-NMHU-E2

CITY MULTI PEFY-P-NMHU-E2

Preview: CITY MULTI PEFY-P-NMLU-E Series

CITY MULTI PEFY-P-NMLU-E Series

Mitsubishi Electric PEFY Series

Preview: PEFY-P20VMS-E

Preview: PEFY-P25VMA-E

Preview: PEFY-P15NMHU-E