To Next PageTo Next PageWhat to do if my Mitsubishi Electric PVFY-P12 NAMU-E Air Conditioner does not run?
If your Mitsubishi Electric Air Conditioner isn't running, first ensure there's no power failure. After power is restored, press the ON/OFF button. Also, check if the power supply is turned ON. Replace the fuse if it's gone or put in the earth leakage breaker if it's tripped.
Why Mitsubishi Electric Air Conditioner air flows out but it does not cool enough or heat enough?
If your Mitsubishi Electric Air Conditioner blows air but doesn't cool or heat sufficiently, check the temperature settings referring to the [Room temperature adjustment]. Clean the filter if it's filled with dust and dirt. Remove any obstacles from the air inlet and outlet of both indoor and outdoor units. Ensure that windows and doors are closed.
What to do if my Mitsubishi Electric PVFY-P12 NAMU-E runs briefly, but soon stops?
If your Mitsubishi Electric Air Conditioner runs briefly and then stops, check for any obstructions at the air inlet and outlet of the indoor and outdoor units and remove them before restarting. Also, clean the filter if it's dirty before rerunning the system.
General| Energy Efficiency Class | A |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240 V, 50 Hz |
| Type | Ceiling Concealed |
| Noise Level (Indoor) | 34 dB(A) |
| Operating Temperature Range (Cooling) | -15 to +24 °C |
| Operating Temperature Range (Heating) | -15 to +24 °C |
