To Next PageTo Next PageWhy is my Mitsubishi Electric Heat Pump emitting a white mist or vapor from the indoor unit?
If the indoor temperature and the humidity are high, this condition may occur when operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
Why doesn't warm air blow immediately from my Mitsubishi Electric TPKA0A0181LA10A Heat Pump when heating starts?
Warm air does not blow until the indoor unit has sufficiently warmed up.
Why does the airflow direction change on my Mitsubishi Electric TPKA0A0181LA10A Heat Pump or why can't I set it?
During cooling mode, the vanes automatically move to the horizontal (down) position after 1 hour when the down (horizontal) airflow direction is selected. During heating mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
Why do the vanes on my Mitsubishi Electric TPKA0A0181LA10A Heat Pump move past the set position when changing airflow direction?
When the airflow direction is changed, the vanes move to the set position after detecting the base position.
What does “ ” mean on my Mitsubishi Electric Heat Pump remote controller?
During central control, “ ” appears in the remote controller display and air conditioner operation cannot be started or stopped using the remote controller.
Why does “Please Wait” appear on my Mitsubishi Electric TPKA0A0181LA10A Heat Pump remote controller?
The initial settings are being performed. Wait approximately 3 minutes.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | TPKA0A0181LA10A |
| Category | Heat Pump |
| Language | English |
Explains warning/caution symbols and crucial safety instructions for safe operation and to prevent damage.
Details the buttons, display, and functions of the wired remote controller.
Describes the procedure for starting and stopping the air conditioner using the ON/OFF button.
Details how to use emergency buttons when the remote controller is unavailable.
Guides on checking filter status, cleaning, and resetting the filter indicator.
Lists frequent problems like poor heating/cooling and their solutions, including error code interpretations.
