To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric Trane NTXWPH09B112A Series and is the answer not in the manual?
General| Cooling Capacity | 9, 000 BTU/h |
|---|---|
| Phase | 1 |
| Series | NTXWPH09B112A |
| HSPF Rating | 10 |
| Refrigerant | R410A |
| Voltage | 208/230V |
Covers electrical hazards, improper use, and safe handling practices.
Explains the meaning of various symbols used in the manual for safety instructions.
Details warnings and cautions for safe installation and electrical work.
Highlights key points like filter cleaning and vane positioning for optimal use.
Identifies and describes parts of the indoor unit and its remote controller.
Identifies and describes the parts of the outdoor unit.
Instructions for installing batteries, setting current time, and changing temperature units.
Guides on setting the remote controller's position based on the indoor unit's installation.
Explains automatic energy saving and temperature control based on room occupancy.
Details how to adjust airflow direction based on occupant location.
Describes how to select AUTO, COOL, DRY, HEAT, and FAN modes.
Explains the meaning of the operation indicator lamp states.
Instructions for adjusting vertical and horizontal airflow direction.
Guidance on selecting and adjusting fan speed for optimal comfort.
Describes a simplified function to recall preferred settings for cooling and heating.
Explains energy-saving swing operation for enhanced comfort.
Mimics natural breeze for reduced discomfort from direct airflow.
Provides maximum cooling or heating performance for a short period.
Instructions for setting simple ON or OFF timers for the unit.
Guides on setting up to 4 ON/OFF timers per day for a week.
Explains how to view and verify the programmed weekly timer settings.
Instructions for cleaning the Nano platinum air filter and air cleaning filters.
Steps for safely removing and cleaning the front panel of the indoor unit.
How to operate the unit when the remote controller is unavailable.
Common problems with the indoor unit and their explanations.
Explains issues related to cooling, heating, airflow, sound, and timers.
Troubleshooting for remote controller display and response problems.
Steps to prepare the unit for periods of non-use to prevent mold growth.
Recommendations for suitable and unsuitable locations for unit installation.
Guidance on power supply requirements and breaker capacity.
Details the operating temperature ranges for cooling and heating modes.
