To Next PageTo Next PageWhy is my Mitsubishi Electric TRANE TPKA0A 1LA00 Heat Pump emitting mist?
A white mist or vapor from your Mitsubishi Electric Heat Pump's indoor unit may occur when the indoor temperature and humidity are high at the start of operation. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
Why does my Mitsubishi Electric Heat Pump turn on by itself?
If your Mitsubishi Electric Heat Pump is running without pressing the ON/OFF button, check if the on timer is set and press the ON/OFF button to stop operation. Also, it might be connected to a central remote controller. Consult the concerned people who control the air conditioner. Another possibility is that the auto recovery feature from power failures has been set; press the ON/OFF button to stop operation.
What to do if an error code appears on my Mitsubishi Electric TRANE TPKA0A 1LA00 remote?
If an error code appears on your Mitsubishi Electric Heat Pump's remote controller, it indicates that the protection devices have been activated. Turn off the power switch immediately and consult your dealer, providing the model name and the error code displayed.
Why does my Mitsubishi Electric Heat Pump make the room smell bad?
An unpleasant odor from your Mitsubishi Electric Heat Pump could be due to the indoor unit drawing in air containing gases and odors from walls, carpeting, furniture, and clothing, which are then recirculated into the room.
How to fix a Mitsubishi Electric Heat Pump that does not heat or cool well?
If your Mitsubishi Electric Heat Pump isn't heating or cooling effectively, start by cleaning the filter, as reduced airflow from a dirty or clogged filter can be the cause. Also, ensure that the temperature is properly adjusted. Check that there's enough space around the outdoor unit and that the indoor unit's air intake or outlet isn't blocked. Finally, make sure no doors or windows are left open.
Why is my Mitsubishi Electric TRANE TPKA0A 1LA00 not blowing warm air immediately?
Warm air will not blow from the indoor unit of your Mitsubishi Electric Heat Pump until it has sufficiently warmed up after starting heating operation.
Why does my Mitsubishi Electric TRANE TPKA0A 1LA00 Heat Pump stop before reaching temperature?
If your Mitsubishi Electric Heat Pump stops before reaching the set temperature in heating mode, it may be due to frost forming on the outdoor unit when the outdoor temperature is low and the humidity is high. The unit will perform a defrosting operation, and normal operation should resume after about 10 minutes.
Why does my Mitsubishi Electric TRANE TPKA0A 1LA00 Heat Pump keep turning off?
If your Mitsubishi Electric Heat Pump stops without you pressing the ON/OFF button, check if the off timer is set and press the ON/OFF button to restart operation. Also, it might be connected to a central remote controller. Consult the concerned people who control the air conditioner.
General| Category | Heat Pump |
|---|---|
| Series | TPKA0A 1LA00 |
| Power Supply | 208-230V, 1 Phase, 60Hz |
| Refrigerant | R410A |
| Operating Temperature Range (Cooling) | 64°F to 115°F (18°C to 46°C) |
| Operating Temperature Range (Heating) | 5°F to 75°F (-15°C to 24°C) |
