Mitsubishi Heavy Industries EEVKIT6-E-C/B User Manual

EEVKIT6-E-C/A, /B
Manual No.'19・KX-T-336
TECHNICAL MANUAL
EEV-KIT
For single refrigeration system
Preliminary information, all of contents are subject to final confirmation by MHI.
In this manual, For multiple refrigeration system of EEV-KIT is shown.
Regarding the others manual please see below table.
General information '19
•
KX-T-335
No.
'19
•
KX-T-337 For multiple refrigeration system (EEVKIT6-E-M/A, /B, -C/A, /B)
Manual
updated February 24, 2021

Mitsubishi Heavy Industries EEVKIT6-E-C/B Specifications

General

Type	Electronic Expansion Valve Kit
Valve Type	Electronic Expansion Valve
Model Number	EEVKIT6-E-C/B
Manufacturer	Mitsubishi Heavy Industries
Application	Refrigerator

Summary

What is a Single Refrigeration System

System A

System B

Functions

SW1-SW5 (Address Setting)

Guide to setting system addresses using SW1-SW5 DIP and rotary switches.

SW6 (Model Capacity Selection)

Instructions for selecting the model capacity using SW6 switches.

SW7 (Function Setting)

Configuration of various functions using SW7 switches.

Supply Air Temperature Control Setting (Cooling)

Supply Air Temperature Control Setting (Heating)

Target Supply Air Temperature Adjustment (Heating Mode)

Outdoor Unit

Target Pressure Adjustment

Procedures for adjusting target pressure on the outdoor unit.

Target Pressure Change Procedure

Step-by-step guide to changing target pressure settings.

Instruction of How to Replace Indoor Unit Control PCB

Function Setting of Wired Remote Control

Detailed guide to configuring functions using the wired remote control.