To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries FDT125VD and is the answer not in the manual?
General| Cooling Capacity | 12.5 kW |
|---|---|
| Heating Capacity | 14.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 3 Phase, 380-415V, 50Hz |
| Refrigerant | R410A |
Details technical specifications for various indoor and outdoor units, including electrical, refrigerant, and dimensions.
Provides detailed dimensional drawings and installation clearances for indoor and outdoor units.
Electrical wiring diagrams and connection details for indoor and outdoor units, including safety precautions.
Presents noise level data, typically as sound pressure levels across different octave bands for indoor and outdoor units.
Displays fan performance curves showing static pressure versus air flow for different unit types and settings.
Illustrates refrigerant piping diagrams for single, twin, triple, and double-twin configurations, detailing component connections.
Outlines operating temperature limits, installation site restrictions, piping limitations, and other usage constraints.
Provides capacity tables and correction factors for selecting appropriate system configurations based on operating conditions.
Covers installation procedures for indoor units, remote controllers, outdoor units, electrical wiring, and piping sets.
Explains how to interpret model names for indoor and outdoor units, breaking down the codes and meanings.
Technical specifications for V Multi indoor units (FDT, FDEN) and outdoor units (FDC), including electrical and operational data.
Provides exterior dimensions and installation drawings for V Multi indoor and outdoor units, and remote controllers.
Electrical wiring diagrams and connection details specific to V Multi systems, showing indoor and outdoor unit connections.
Noise level data for indoor and outdoor units, presented as sound pressure levels across different frequency bands.
Illustrates refrigerant piping configurations for various V Multi system combinations, including branching.
Details operating conditions, installation constraints, and piping limitations applicable to V Multi systems.
Contains tables for selecting V Multi system combinations based on indoor/outdoor unit capacities and branch pipe sets.
Covers installation procedures for V Multi indoor units, remote controllers, outdoor units, electrical wiring, and branching pipe sets.
Information on wireless remote controller kits for various series (FDTC, FDT, FDEN, FDUM/FDU), including installation and settings.
Describes the features and functions of the simple wired remote controller (RCH-E3).
Instructions for installing the fan controller kit (U-FCRA), used to adjust fan speed and static pressure for duct systems.
Installation procedure for the base heater kit (CW-H-E) to prevent freezing in outdoor units at low ambient temperatures.
