Need help?Do you have a question about the Mitsubishi Heavy Industries SRF25ZS-W and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Unit Weight | 9.5 kg |
| Outdoor Unit Weight | 31 kg |
| Refrigerant | R32 |
| Indoor Unit Noise Level | 21 dB(A) |
Explains how to use the wireless remote control for various operations.
Describes the function and operation of the unit's physical ON/OFF button.
Details the auto restart feature that resumes operation after a power interruption.
Provides instructions for setting up two units in a single room with one remote.
Explains how to enable or disable the annual cooling control function.
Describes the high power mode for intensified cooling or heating for 15 minutes.
Details the economy mode for energy saving by suppressing operation power.
Explains how to control the flap direction and swing using the remote.
Describes switching between upper/lower air outlets and auto air outlet selection.
Covers comfortable timer (ON timer), sleep timer, OFF timer, and weekly timer operations.
Explains the silent mode operation that reduces noise by adjusting fan and compressor speeds.
Describes the night setback function for heating operation at a set temperature.
Details the operational aspects and components during heating mode.
Explains the operational aspects and components during cooling mode.
Describes the purpose and control of the dehumidifying (DRY) mode.
Details how the operation mode is determined and changes automatically.
Explains various protective controls like dew prevention and overload protection.
Provides essential safety precautions for disassembling and working on the unit.
Lists initial checks to perform before starting troubleshooting procedures.
Step-by-step guide for diagnosing issues when the unit does not operate.
Guide for diagnosing problems when the unit is running but malfunctioning.
Explains how to interpret error codes displayed by the unit's self-diagnosis system.
Details how to access and use the service mode for detailed troubleshooting.
Provides detailed inspection steps for specific trouble details.
Describes phenomena caused by short circuits or wire breakages on sensors.
Guides for checking the indoor unit PCB and fan motor.
Provides steps to check if the wireless remote control is functioning correctly.
Outlines the procedure to inspect for blown fuses on unit PCBs.
Highlights key inspection points for the outdoor unit and its components.
Wiring diagrams and component identification for indoor units.
Wiring diagrams and component identification for outdoor units.
Piping diagram for SRF25ZS-W and 35ZS-W models.
Piping diagram for the SRF50ZSX-W model.
To Next Page
