What to do if my Mitsubishi Heavy Industries SRK20ZGX-S won't restart?
If you cannot restart your Mitsubishi Heavy Industries Air Conditioner immediately after stopping it, please wait for three minutes. The three-minute protection timer in the microcomputer automatically starts up again.
Why Mitsubishi Heavy Industries SRK20ZGX-S not blowing air in heating mode?
If your Mitsubishi Heavy Industries Air Conditioner is not blowing air when starting the HEATING operation, it's likely due to the unit preventing cold air from being blown out until the indoor heat exchanger warms up. Please wait 2 to 5 minutes for the air to start flowing.
Why Mitsubishi Heavy Industries SRK20ZGX-S not blowing air in DRY mode?
If your Mitsubishi Heavy Industries Air Conditioner is not blowing air when starting the DRY operation, it may be because the indoor fan stops to prevent re-evaporation of dehumidified moisture and to save energy.
Why does my Mitsubishi Heavy Industries SRK20ZGX-S emit steam when cooling?
If your Mitsubishi Heavy Industries Air Conditioner is emitting some steam during COOL operation, it may occur if the room's temperature and humidity are very high. It disappears as soon as the temperature and humidity decrease.
What is the gurgling sound from my Mitsubishi Heavy Industries Air Conditioner?
If you hear a slight gurgling sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by liquid refrigerant moving within the piping of the indoor unit. Liquid refrigerant will be evaporated and become as gaseous refrigerant during passing through the pipe in order to absorb the heat inside the room.
What is the cracking sound from my Mitsubishi Heavy Industries Air Conditioner?
If you hear a slight cracking sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by the expansion and contraction of the plastic body due to temperature change of plastic material because of compressor’s alternative operation.
Why does the RUN light stay on after stopping my Mitsubishi Heavy Industries SRK20ZGX-S?
If the RUN light stays on even though the Mitsubishi Heavy Industries Air Conditioner operation was stopped, it means that the RUN light blinks during CLEAN operation. Run light turns off when CLEAN operation ends.
What is the hissing sound from my Mitsubishi Heavy Industries Air Conditioner?
If you hear a hissing or clicking sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by the operation of the refrigerant control valves or electric components.
What is the whistling noise from my Mitsubishi Heavy Industries SRK20ZGX-S Air Conditioner outdoor unit?
The whistling noise heard from the outdoor unit of your Mitsubishi Heavy Industries Air Conditioner means that the revolution speed is picking up on the compressor.
General| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | SRK20ZGX-S |
| Category | Air Conditioner |
| Language | English |
To Next Page
