To Next PageTo Next PageWhat to do if my Mitsubishi Heavy Industries SRK35ZGX-S Air Conditioner won't restart?
If you cannot restart your Mitsubishi Heavy Industries Air Conditioner immediately after stopping it, please wait for three minutes. The three-minute protection timer in the microcomputer automatically starts up again.
Why Mitsubishi Heavy Industries SRK35ZGX-S not blowing air in heating mode?
If your Mitsubishi Heavy Industries Air Conditioner is not blowing air when starting the HEATING operation, it's likely due to the unit preventing cold air from being blown out until the indoor heat exchanger warms up. Please wait 2 to 5 minutes for the air to start flowing.
Why Mitsubishi Heavy Industries Air Conditioner not blowing air in DRY mode?
If your Mitsubishi Heavy Industries Air Conditioner is not blowing air when starting the DRY operation, it may be because the indoor fan stops to prevent re-evaporation of dehumidified moisture and to save energy.
Why does my Mitsubishi Heavy Industries SRK35ZGX-S Air Conditioner emit steam when cooling?
If your Mitsubishi Heavy Industries Air Conditioner is emitting some steam during COOL operation, it may occur if the room's temperature and humidity are very high. It disappears as soon as the temperature and humidity decrease.
What is the gurgling sound from my Mitsubishi Heavy Industries Air Conditioner?
If you hear a slight gurgling sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by liquid refrigerant moving within the piping of the indoor unit. Liquid refrigerant will be evaporated and become as gaseous refrigerant during passing through the pipe in order to absorb the heat inside the room.
What is the cracking sound from my Mitsubishi Heavy Industries SRK35ZGX-S?
If you hear a slight cracking sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by the expansion and contraction of the plastic body due to temperature change of plastic material because of compressor’s alternative operation.
Why does the RUN light stay on after stopping my Mitsubishi Heavy Industries SRK35ZGX-S Air Conditioner?
If the RUN light stays on even though the Mitsubishi Heavy Industries Air Conditioner operation was stopped, it means that the RUN light blinks during CLEAN operation. Run light turns off when CLEAN operation ends.
What is the hissing sound from my Mitsubishi Heavy Industries SRK35ZGX-S?
If you hear a hissing or clicking sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by the operation of the refrigerant control valves or electric components.
What is the whistling noise from my Mitsubishi Heavy Industries Air Conditioner outdoor unit?
The whistling noise heard from the outdoor unit of your Mitsubishi Heavy Industries Air Conditioner means that the revolution speed is picking up on the compressor.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Type | Split System |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 mm |
Precautions to be taken during the installation of the air conditioner.
Precautions to be observed during the normal operation of the air conditioner.
Description of different operational modes like HEAT, COOL, DRY, and AUTO.
Overview of features such as Amenity facility, Timer, HIGH POWER, ECONOMY, and Airflow adjustment.
Identification and description of parts within the indoor unit.
Identification and description of parts within the outdoor unit.
List and description of accessories provided with the air conditioner.
Procedures for opening, closing, and removing the air inlet panel.
Details on the buttons and their functions on the remote control.
Explanation of the indicators on the remote control and their meanings.
Explanation of how the remote control sends signals to the air conditioner.
How to adjust the temperature setting while the unit is in AUTO mode.
Explanation of the different fan speed options available for operation.
Specification of the operational ranges for cooling and heating modes.
Explanation of the mechanism and performance of the HEAT mode.
Description of the automatic defrosting process during heating operation.
How to set and use the memory function for air flow direction.
Explanation of how amenity facilities help achieve optimal room temperature at ON time.
Steps to set the current time on the remote control.
Details on the HIGH POWER mode, its duration, and cancellation conditions.
Details on the ECONOMY mode, its features, and cancellation conditions.
Steps to replace the batteries in the remote control when exhausted.
Important warnings and precautions for safe remote control usage.
Tips for economical and comfortable use of the air conditioner.
Instructions for cleaning filters, the unit, and air inlet panels.
Steps for proper shutdown and storage of the unit at the end of the season.
Steps for preparing and starting the unit at the beginning of the season.
Guidelines for selecting installation location and managing operating noise.
Recommendations for professional inspection and periodic maintenance.
Checks for issues like no operation, poor cooling, or poor heating.
