To Next PageTo Next PageWhat to do if my Mitsubishi Heavy Industries SRK50ZM-S Air Conditioner blows cold air when heating?
When outdoor temperature is low and humidity is high, your Mitsubishi Heavy Industries Air Conditioner may perform defrosting automatically. Please wait.
What to do if my Mitsubishi Heavy Industries SRK50ZM-S Air Conditioner does not work at all?
If your Mitsubishi Heavy Industries Air Conditioner isn't working, check these possible causes: * Ensure the power switch is turned on. * Check if the timer has been set to the “ON” position. * Verify there isn't a power failure or a blown fuse.
Why is my Mitsubishi Heavy Industries SRK50ZM-S not cooling properly?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling well, consider these factors: * Check if direct sunlight is entering the room. * Identify and reduce any heat sources in the room. * Consider if there are too many people in the room.
What to do after a power cut if my Mitsubishi Heavy Industries SRK50ZM-S Air Conditioner doesn't restart?
If your Mitsubishi Heavy Industries Air Conditioner does not restart after a power cut, use the remote control to start the operation again.
Why does my Mitsubishi Heavy Industries SRK50ZM-S Air Conditioner fan continue to run after stopping?
The fan in your Mitsubishi Heavy Industries Air Conditioner might continue to run after you've stopped the unit for these reasons: * Indoor fan: If set to CLEAN operation, the fan will not stop after 2 hours. * Outdoor fan: The fan will not stop for about 1 minute to protect the unit.
What to do if my Mitsubishi Heavy Industries SRK50ZM-S Air Conditioner doesn't restart after a power cut?
If the auto restart function is not set, the Mitsubishi Heavy Industries Air Conditioner will not restart automatically after a power cut. Use the remote control to start the operation again.
Why does my Mitsubishi Heavy Industries Air Conditioner make a whistling noise from the outdoor unit?
The whistling noise from the outdoor unit of your Mitsubishi Heavy Industries Air Conditioner means that the revolution speed of the compressor is increasing or decreasing.
Why does my Mitsubishi Heavy Industries Air Conditioner make a “Shooooo” sound when turned off?
The “Shooooo” sound from your Mitsubishi Heavy Industries Air Conditioner when turned off is the sound when operation of another indoor unit is stopped.
Why is my Mitsubishi Heavy Industries SRK50ZM-S Air Conditioner not cooling or heating properly?
Poor cooling or heating in your Mitsubishi Heavy Industries Air Conditioner can be caused by several factors. Check if you have set the thermostat at a suitable temperature, ensure the air filter is clean (not clogged), and make sure you haven't left any doors or windows open.
Why is my Mitsubishi Heavy Industries SRK50ZM-S not responding to the remote control?
If the signal receiver on your Mitsubishi Heavy Industries Air Conditioner is exposed to direct sunlight or other bright light, the remote control signals may not be received. Try to cut out the sunlight or reduce the other light.
General| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | SRK50ZM-S |
| Category | Air Conditioner |
| Language | English |
Identifies and describes parts of the indoor air conditioning unit.
Identifies and describes parts of the outdoor air conditioning unit.
Covers unit display, remote features, and included accessories.
Explains airflow adjustments and buzzer sound notifications.
Instructions for replacing remote batteries and mounting the control holder.
Key warnings and precautions for handling the remote control safely.
Steps for remote failures and using temporary unit operation.
Steps for configuring remote and indoor units for simultaneous installation.
How to enable and disable the remote control's child lock function.
Explanation of the remote control's operational buttons and their functions.
Details on how signals are transmitted from the remote to the unit.
Guide to setting the current time and day of the week on the remote.
How the unit selects COOL, HEAT, or DRY based on room temperature.
How to modify temperature settings while the unit is in AUTO operation.
How to choose different fan speeds for various operating modes.
Step-by-step guide to choosing and configuring operating modes.
Recommended indoor and outdoor temperature ranges for optimal unit performance.
Explanation of heat pump mechanism and automatic defrost function.
How to adjust the direction of air outlet flaps and louvers.
How to activate and deactivate the automatic 3D airflow control.
How to set the unit to stop automatically after a specified time for comfort.
How to set the unit to stop automatically at a specific time.
How to set the unit to start automatically at a specific time.
How to use both Sleep and On timers simultaneously for sequential operation.
How to use both On and Off timers simultaneously for sequential operation.
How to use the feature to eliminate allergens from the air.
How to program the unit's operation for different times and days of the week.
How to switch the weekly timer function on or off.
Guide to setting specific timer programs for each day of the week.
How to set the same program for all days of the week simultaneously.
How to define operation mode, fan speed, and other settings for a program.
How to verify the programmed timer settings.
How to cancel specific daily timer programs.
How to cancel all programmed timer settings at once.
How to view the programmed weekly timer settings.
How to activate the high power mode for rapid cooling or heating.
How to activate the economy mode for energy saving.
How to maintain a comfortable temperature at night or when away.
How to reduce the noise level of the unit for quieter operation.
How to run the clean operation to remove moisture and prevent mold.
How the unit resumes operation after a power interruption.
Advice for economical and comfortable use of the air conditioner.
How to adjust airflow based on the unit's installation position.
Step-by-step guide for cleaning the air filters.
Instructions for cleaning the indoor unit and air inlet panel.
Tasks for preparing the unit at the end and start of the operating season.
Instructions for installing and replacing air-cleaning filters.
Recommendations for installing the unit in a suitable location.
Checks to perform before calling a service technician for non-working units.
Explanations for various operational notices and sounds from the unit.
Situations requiring immediate contact with a dealer for repairs.
Guidelines for operating multiple units simultaneously.
How to understand error codes indicated by the unit's lights.
