To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries SRK60ZIX-S and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 6.0 kW |
| Heating Capacity | 6.8 kW |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (W x H x D) | 1197 x 339 x 262 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 285 mm |
| Refrigerant Type | R32 |
| Energy Efficiency Rating (Cooling) | A++ |
| Refrigerant | R32 |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Indoor Unit Weight | 17.0 kg |
| Outdoor Unit Weight | 45.0 kg |
| Operating Temperature Range (Cooling) | 0 to 46°C |
| Operating Temperature Range (Heating) | -15 to 24°C |
| Noise Level (Indoor Unit) | 21 dB (Low) |
Safety rules for installing the air conditioner unit.
Safety rules for operating the air conditioner unit.
Identifies parts of the indoor air conditioning unit.
Identifies parts of the outdoor air conditioning unit.
Explains the display section and indicator lights on the remote.
Lists and describes accessories for the remote control.
Instructions for replacing batteries in the remote control.
Troubleshooting and temporary operation for remote control failures.
Describes the function of each button on the remote control.
Step-by-step guide to setting the current time on the remote.
How the unit automatically selects modes based on room temperature.
How to adjust the fan speed for optimal airflow.
Detailed operation for specific modes and temperature settings.
Explains the mechanism, capacity, and defrosting of HEAT mode.
How to adjust vertical and horizontal airflow directions.
How to use the 3D AUTO mode for efficient room conditioning.
How to set the unit to stop automatically after a set time.
How to set the unit to stop at a specific time.
How to set the unit to start operation at a specific time.
How to set both SLEEP and ON timers simultaneously.
How to set repeating daily timer operations.
How to use the feature to eliminate allergens.
How to activate powerful cooling or heating for 15 minutes.
How to set a softer operation for energy saving.
How to run a cleaning cycle to remove moisture and mold.
How the unit resumes operation after a power interruption.
Guidelines for choosing the best location for the unit.
How to set the unit's location for optimal airflow.
Step-by-step guide on how to clean the air filters.
Instructions for opening and cleaning the air inlet panel.
Tasks to perform at the end and start of the operating season.
How to replace allergen and deodorizing filters.
Advice on installing the unit correctly for performance and noise.
Checks to perform when the air conditioner is not working properly.
Explains common sounds and behaviors during operation.
Situations requiring dealer assistance and contact information.
Guidelines for using multiple units simultaneously.
Error codes indicated by the RUN light and their causes.
Error codes indicated by the TIMER light and their causes.
