Mitsubishi MOTORS Outlander PHEV 2017 User Manual (English)

Questions and Answers:

H
Howard NixonAug 5, 2025
What to do if charging cannot be started on my Mitsubishi MOTORS Outlander PHEV 2017 Automobile?
- T
  Terri YoderAug 5, 2025
  If charging cannot be started, there are several possible causes: * If the operation mode of the power switch is in the “ON” position, put it in “OFF” before charging. * If the drive battery is already fully charged, charging cannot be performed. Charging automatically turns off when the battery is full. * If the temperature of the drive battery is too high or too low, confirm the drive battery temperature. * If the auxiliary battery is discharged, charge or emergency start the auxiliary battery, as the drive battery cannot be charged if the vehicle electrical systems cannot be turned on. * If the vehicle or charging cable has a malfunction, check for warning lamps or indicators. If a warning is displayed, stop charging and contact a MITSUBISHI MOTORS Authorized Service Point.
L
Luis SimsAug 12, 2025
What to do if normal charging is discontinued in my Mitsubishi MOTORS Outlander PHEV 2017 Automobile?
- R
  Rachel ShafferAug 12, 2025
  If normal charging is discontinued, consider these possibilities: * There may have been a power failure, or the breaker may have failed. Charging will resume when the power source is reset. * Check that the EV charging cable has not been disconnected. * If the charge connector button is pressed for a long period of time, charging will be stopped. Start the charging procedure again. * If the temperature of the drive battery is too high or too low, confirm the drive battery temperature. * Charging will stop depending on the timer function setting of the normal charge device. Try it again with cancelling the timer settings.
N
nellisonAug 19, 2025
Why normal charging cannot be started on my Mitsubishi MOTORS Outlander PHEV 2017?
- A
  Anna GonzalezAug 19, 2025
  If normal charging cannot be started, it might be due to the following reasons: * Confirm that there has not been a power failure and make sure the breaker is on. If using an outlet with a timer, power is only available at the set time. Also, check if the POWER indicator on the control box is illuminated. * Ensure the charge connector is correctly connected. * If the charge connector was repeatedly connected and disconnected in a short time, disconnect it, wait a while, and then restart the charging procedure.
P
Patricia GriffinAug 27, 2025
Why did the quick charge discontinue on my Mitsubishi MOTORS Outlander PHEV 2017?
- K
  Katherine BrooksAug 27, 2025
  Quick charge might be discontinued because: * Charging will stop depending on the timer function setting of the quick charge device. If you need to charge the drive battery more, start the charging procedure again. * Charging is designed to stop when the drive battery capacity reaches 80%. If you need to charge the drive battery more than 80%, start the charging procedure again. * Check whether the power supply for the quick charger is off. Consult an administrator or a maker of the quick charger.